Can You Use RAM With Different Timings?

Is 2 8gb RAM better than 16gb?

2 8GB sticks will yield roughly 25% more performance over a comparable 16GB stick.

Dual channel is always going to be better than single.

This will utilize dual channel, so it’s basicslly going through the ram at a speed as if it’s only 8gb, but double the ram..

How do I know if my RAM slots are bad?

If you know 1 slot is good, post that slot with another slot (both with ram in it) and see if your motherboard posts both sticks or just one stick. If one stick doesn’t post, try that stick in another slot. If it still doesn’t post, that stick is dead. If it does post, your slot is busted.

Can you mix and match ddr3 RAM?

What are the rules on mixing RAM? … You are right about mixing different RAM modules—if there’s one thing you absolutely can’t mix, it’s DDR with DDR2, or DDR2 with DDR3, and so on (they won’t even fit in the same slots).

Can you mix RAM with different CAS latency?

CAS Latency Column Address Strobe Latency, also known as the CAS Latency, or simply “CL,” is basically the time your RAM needs to return the stored data to the CPU. The rule is simple: the lower the CAS Latency is, the faster it operates. It is definitely not recommended to mix two RAMs with different CAS Latencies.

Can you use all 4 RAM slots?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

Can you change RAM timings?

Unless you are a computer expert, it’s inadvisable to manually change the advanced settings in the BIOS, including memory speed. RAM timing numbers are displayed in the following arrangement: “6-6-6-22.” Consult your RAM specifications or documentation to determine the rated timings of your RAM.

Can I use 1333mhz and 1600MHz RAM together?

Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Is 32gb RAM overkill?

32GB, on the other hand, is overkill for most enthusiasts today, outside of people who are editing RAW photos or high-res video (or other similarly memory-intensive tasks).

What are good RAM timings?

Your millage may vary depending on the word burst allowance being used in a transfer, so these are just basic timing numbers. CL 8/9 is pretty good timing for 1600 sticks, a bit faster than 11. And a good read on what DDR4 is all about with respect to DDR3 and future DRAM configurations…

Will Ram with different timings work together?

Reputable. Unless there are minor voltage differences or they otherwise decide not to play together, which is incredibly common. There’s a reason manufacturers sell matched sets: not every stick of RAM will play nice with every other stick of RAM, and matched sets have been tested to work together.

Can you use 2 different Ram brands?

Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. … So at the end of the day, yes you can mix RAM brands as long as you are careful.

Can I add 8gb RAM to 4gb?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

How do I optimize RAM timings?

Start off by lowering the first (tCL) and third (tRP) timing by 1. If this passes one round of Memtest86+, try lowering the second timing (tRCD) by 1 and running the test again. Note: If you haven’t reached your maximum RAM voltage, increasing it will usually allow you to tighten your timings even further.

Does CAS latency really matter?

The lower the CAS, the faster the RAM—and consequently, the more expensive. When deciding between RAM of different clock speeds, the RAM with the higher clock speed is superior; but when choosing between RAM of identical clock speeds, the RAM with lower CAS latency is faster.

Can you mix RAM speeds ddr4?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

What happens if you put RAM in wrong slots?

If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”. … If the ram in slot 1 is bad and you use integrated graphics then this will cause even more issues because the first portion of stick 1 is used for video memory.

Is it better to use 2 or 4 RAM slots?

Installing four memory modules in a dual-channel system can improve performance in certain scenarios. … It’s also worth noting that four modules can also limit memory performance in the sense that you might not be able to achieve the same frequency and timings that you could with just two modules.